Acorn Computers BBC Micro Model B w/8271 — Acorn BBC Micro Model B w/8271 User Guide Manual PDF

401 and COPY perform their normal cursor editing function. *FX4,0 resets the system so that the cursor editing keys *FX4,1 disables the cursor editing and makes the cursor editing keys generate normal ASCII codes. The codes are shown below in both decimal and hex numbers. COPY 135 &87 136 &88 137 &89 138 &8A 139 &8B *FX4,2 permits the and COPY keys to be programmed in the same way as the user defined function keys. In other words they may contain strings. In this case the *KEY numbers are COPY 11 12 13 14 15 *FX5 is used to select the printer type. *FX5,1 selects output to the parallel (Centronics type) output connector. *FX5,3 selects a user supplied printer driver (see chapter 38).

*FX5,2 selects the serial RS423 output. Note that none of these will actually cause output to appear on the printer. VDU2 (or CTRL B ) must be used to start output going to the selected printer channel. *FX5,0 can be used to select a ‘printer sink’ where characters can be lost without the possibility of the system ‘hanging’ with a full printer buffer. *FX6 is used to set the character which will be suppressed by the printer driver routines. Some printers do an automatic ‘line feed’ when they receive a ‘carriage return’. It is therefore useful to be able to prevent the line feed characters from reaching the printer.

The ASCII code for line feed is decimal code 10 so this can be achieved with the statement *FX6,10