beckhoff TwinCAT 2 Motion — 2.2 Channel Errors

Overview of NC Errors NC Errorcodes 11 Version: 1.1 Error(Hex) Error(Dec) Error type Description The function is not presently available, because a similar function is already being processed. Usually this is a result of access conflicts: more than one instance wants to issue commands to the channel. This can, for example, be the consequence of an incorrect PLC program. 4107 16647 Function Function/command not supported A requested function or command is not supported by the channel. 4108 16648 Parameter Invalid parameter while starting Parameters to start the channel (TwinCAT-Start) are invalid. Typically there is an invalid memory size or channel type requested.

4109 16649 Function Channel function/command is not executable A channel function e.g. interpreter start is not executable because the channel is already busy, no program is loaded or in an error state. 410A 16650 Function ItpGoAhead not executable The requested ItpGoAhead command is not executable, because the interpreter is not executing a decoder stop. 4110 16656 Parameter Error opening a file The specified file does not exist. Example: NC program unknown. 4111 16657 NC programming Syntax error during loading The NC has found a syntax error when loading an NC program. 4112 16658 NC programming Syntax error during interpretation The NC has found a syntax error when executing an NC program.

4113 16659 NC programming Missing subroutine The NC has found a missing subroutine while loading. 4114 16660 Memory Loading buffer of interpreter is too small The capacity of the interpreter loading buffer has been exceeded. 4115 16661 Internal Symbolism Reserved, currently not used. 4116 16662 Internal Symbolism Reserved, currently not used. 4117 16663 NC programming Subroutine incomplete The header of the subroutine is missing. 4118 16664 NC programming Error while loading the NC program The maximum number of loadable NC programs has been reached. Possible cause: Too many subprograms have been loaded from a main program.

4119 16665 NC programming Error while loading the NC program The program name is too long. 4120 16672 NC programming Divide by Zero