beckhoff TwinCAT 2 Motion — 2.2 Channel Errors

Overview of NC Errors NC Errorcodes 13 Version: 1.1 Error(Hex) Error(Dec) Error type Description The NC has encountered an unacceptable change of parameters for the tool compensation during execution. This can be, for example, a changed tool radius while a circle was programmed. 4151 16721 Parameter Cannot calculate tool compensation The NC has encountered an error by the calculation of the tool compensation. 4152 16722 NC programming Tool compensation The plane for the tool compensation cannot be changed here. This error occurred for instance by changing the plane when the tool radius compensation is turned on or active.

4153 16723 NC programming Tool compensation The D-Word is missing or invalid by turning on the tool compensation. 4154 16724 NC programming Tool compensation The specified tool radius is invalid because the value is less or equal zero. 4155 16725 NC programming Tool compensation The tool radius cannot be changed here 4156 16726 Internal Tool compensation The Collision Detection Table is full. 4157 16727 Internal Tool compensation An internal error has occurred when switching on the bottleneck detection 4158 16728 Internal Tool compensation An internal error occurred in the bottleneck detection: Update Reversed Geo failed.

4159 16729 NC programming Tool compensation An unexpected combination of geometry types with bottleneck detection turned on was detected. 415A 16730 NC programming Tool compensation The programmed inner circle is smaller than the cutter radius. 415B 16731 NC programming Tool compensation The bottleneck detection recognized a contour violation. 415C 16732 Memory No memory The table for corrected entries is full. 415D 16733 Memory No memory The input table for tangential following is full. 415E 16734 Memory No memory The executing table for tangential following is full. 415F 16735 Internal Geometry calculation The geometric entry for the tangential following cannot be calculated.

4160 16736 Internal Reserved Reserved, currently not used. 4161 16737 Internal Reserved Reserved, currently not used.