Overview of NC Errors 2.4 Axis Errors NC Errorcodes 36 Version: 1.1 Error(Hex) Error(Dec) Error type Description This is a customer-specific monitoring function. Error(Hex) Error(Dec) Error type Description 4300 17152 Parameter Axis ID not allowed The value for the axis ID is not allowed, e.g. because it has already been assigned, is less than or equal to zero, is greater than 255, or does not exist in the current configuration. Value range: [1 ... 255] Unit: 1 4301 17153 Parameter Axis type not allowed The value for the axis type is unacceptable because it is not defined. Type 1: servo Type 2: fast/creep Type 3: stepper motor Value range: [1 ... 3] Unit:
1 4306 17158 Parameter Slow manual velocity not allowed The value for the slow manual velocity is not allowed. Value range: [0.0, 10000.0] Unit: e.g. m/min 4307 17159 Parameter Fast manual velocity not allowed The value for the fast manual velocity is not allowed. Value range: [0.0, 10000.0] Unit: e.g. m/min 4308 17160 Parameter Rapid traverse velocity not allowed The value for the rapid traverse velocity is not allowed. Value range: [0.0, 10000.0] Unit: e.g. m/min 4309 17161 Parameter Acceleration not allowed The value for the axis acceleration is not allowed. Value range: [0.0, 1000000.0] Unit: e.g.
m/s/s 430A 17162 Parameter Deceleration not allowed The value for the axis deceleration is not allowed. Value range: [0.0, 1000000.0] Unit: e.g. m/s/s 430B 17163 Parameter Jerk not allowed The value for the axis jerk is not allowed. Value range: [0.0, 1000000.0] Unit: e.g. m/s/s/s 430C 17164 Parameter Delay time between position and velocity is not permissible (dead time compensation) The value for the delay time between position and velocity ("dead time compensation") is not allowed. Value range: [0, 0.1] Unit: s 430D 17165 Parameter Override type not allowed The value for the velocity override type is not allowed. Type 1: Related to internal reduced velocity (default value) Type 2:
Related to original external start velocity Value range: [1 ... 4] Unit: 1