Overview of NC Errors NC Errorcodes 38 Version: 1.1 Error(Hex) Error(Dec) Error type Description 4319 17177 Parameter Creep distance in negative direction not allowed The value for the creep distance in the negative direction is not allowed. Value range: [0.0, 100000.0] Unit: e.g. mm 431A 17178 Parameter Braking distance in positive direction not allowed The value for the braking distance in the positive direction is not allowed. Value range: [0.0, 100000.0] Unit: e.g. mm 431B 17179 Parameter Braking distance in negative direction not allowed The value for the braking distance in the negative direction is not allowed. Value range: [0.0, 100000.0] Unit: e.g.
mm 431C 17180 Parameter Deceleration time in positive direction not allowed The value for the deceleration time in the positive direction is not allowed. Value range: [0.0, 60.0] Unit: s 431D 17181 Parameter Deceleration time in negative direction not allowed The value for the deceleration time in the negative direction is not allowed. Value range: [0.0, 60.0] Unit: s 431E 17182 Parameter Switching time from rapid to slow traverse not allowed The value for the time to switch from rapid to slow traverse is not allowed. Value range: [0.0, 60.0] Unit: s 431F 17183 Parameter Creep distance for stop not allowed The value for the creep distance for an explicit stop is not allowed. Value range:
[0.0, 100000.0] Unit: e.g. mm 4320 17184 Parameter Motion monitoring not allowed The value for the activation of the motion monitoring is not allowed. Value range: [0, 1] Unit: 1 4321 17185 Parameter Position window monitoring not allowed The value for the activation of the position window monitoring is not allowed. Value range: [0, 1] Unit: 1 4322 17186 Parameter Target window monitoring not allowed The value for the activation of target window monitoring is not allowed. Value range: [0, 1] Unit: 1 4323 17187 Parameter Loop not allowed The value for the activation of loop movement is not allowed. Value range: [0, 1] Unit:
1 4324 17188 Parameter Motion monitoring time not allowed The value for the motion monitoring time is not allowed. Value range: [0.0, 600.0] Unit: s