Overview of NC Errors NC Errorcodes 46 Version: 1.1 Error(Hex) Error(Dec) Error type Description 440F 17423 Parameter Filter time actual position correction The value for the actual position correction filter time is not allowed (P- T1 filter). Value range: [0.0, 60.0] Unit: 1 4410 17424 Parameter Search direction for referencing cam inverted The value of the search direction of the referencing cam in a referencing procedure is not allowed. Value 0: Positive direction Value 1: Negative direction Value range: [0, 1] Unit:
1 4411 17425 Parameter Search direction for sync pulse (zero pulse) inverted The value of the search direction of the sync pulse (zero pulse) in a referencing procedure is not allowed. Value 0: Positive direction Value 1: Negative direction Value range: [0, 1] Unit: 1 4412 17426 Parameter Reference position The value of the reference position in a referencing procedure is not allowed. Value range: [-1000000.0, 1000000.0] Unit: e.g.
mm 4413 17427 Parameter Distance monitoring between activation of the hardware latch and occurrence of the sync pulse (obsolete) The flag for the distance monitoring between activation of the hardware latch and occurrence of the sync/zero pulse ("latch valid") is not allowed. Value 0: Passive Value 1: Active Value range: [0, 1] Unit: 1 4414 17428 Parameter Minimum gap between activation of the hardware latch and occurrence of the sync pulse (obsolete) The value for the minimum gap in increments between activation of the hardware latch and occurrence of the sync/zero pulse ("latch valid") during a referencing procedure is not allowed. Value range: [0, 65536] Unit: INC