Overview of NC Errors NC Errorcodes 65 Version: 1.1 Error(Hex) Error(Dec) Error type Description 4629 17961 Monitoring Feedback drive operation mode changeover During drive operation mode changeover, the requested operation mode was not consistently reported back within the monitoring time of 8 cycles. CoE-Motion Controllers: Reading or writing the CoE Motion Controller operation mode is only possible if the CoE objects 0x6060 "Modes of operation" and 0x6061 "Modes of operation display" are in the cyclic process data (PDO list) and a valid default operation mode has been configured. SoE-Motion Controllers:
Reading or writing the current SoE Motion Controller operation mode is only possible if this operation mode has been predefined in one of the SoE parameters S-0-0032 to S-0-0035. 0x4630 … 0x463F: Error codes are reserved for external drive errors (e.g. stepper motor terminal or MC PowerStepper function block). _ 4630 17968 Monitoring Overtemperature Overtemperature was detected or reported in the drive or terminal. 4631 17969 Monitoring Undervoltage Undervoltage was detected or reported in the drive or terminal. 4632 17970 Monitoring Wire break in phase A A wire break in phase A was detected or reported in the drive or terminal.
4633 17971 Monitoring Wire break in phase B A wire break in phase B was detected or reported in the drive or terminal. 4634 17972 Monitoring Overcurrent in phase A Overcurrent was detected or reported in phase A in the drive or terminal. 4635 17973 Monitoring Overcurrent in phase B Overcurrent was detected or reported in phase B in the drive or terminal. 4636 17974 Monitoring Torque overload (stall) A torque overload (stall) was detected or reported in the drive or terminal. 4640 17984 Initialization Drive initialization Drive has not been initialized. Although the drive has been created, the rest of the initialization has not been performed: 1. Initialization of drive I/O, 2.
Initialization of drive, 3. Reset of drive. 4641 17985 Address Axis address The drive does not know its axis, or the axis address has not been initialized. 4642 17986 Address Address I/O input structure The drive has no valid I/O input address in the process image. 4643 17987 Address Address I/O output structure The drive has no valid I/O output address in the process image.