Overview of NC Errors NC Errorcodes 71 Version: 1.1 Error(Hex) Error(dec) Error type Description 4B13 19219 Parameter Index for tool description is invalid The index for the tool description is invalid. 4B14 19220 Function Version of the cyclic channel interface does not match the requested function or the function block This error occurs if an older TwinCAT version is used to call new functions of a later TcNci.lib version. 4B15 19221 Function Channel is not ready for the requested function The requested function cannot be executed, because the channel is in the wrong state. This error occurs during reverse travel, for example, if the axis was not stopped with ItpEStop first.
4B16 19222 Function Requested function is not activated The requested function requires explicit activation. 4B17 19223 Function Axis is already in another group The axis has already been added to another group. 4B18 19224 Function Block search could not be executed successfully The block search has failed. Possible causes: • Invalid block number 4B19 19225 Parameter Invalid block search parameter This error occurs if the FB ItpBlocksearch is called with invalid parameters (e.g. E ItpDryRunMode, _ E ItpBlockSearchMode) _ 4B20 19232 Function Cannot add all axes This error occurs if an auxiliary axis is to be added to an interpolation group, but the function fails.
It is likely that a preceding instruction of an auxiliary axis was skipped. Error numbers 0x4B30 .. 0x4B3F are used in the TcMcCam-Lib (MC NC TableErrorCodes): _ _ 4B30 19248 Parameter Pointer is invalid A pointer to a data structure is invalid, e.g. Null • Data structure MC CAM REF was not initialized _ _ 4B31 19249 Parameter Memory size invalid The specification of the memory size (SIZE) for a data structure is invalid. • Memory size is 0 or smaller than an element of the addressed data structure. • Memory size is smaller than the requested amount of data. • Memory size does not match other parameters, such as number of points, number of rows or number of columns.
4B32 19250 Parameter Cam plate ID is invalid The ID of a cam plate is not between 1 and 255. 4B33 19251 Parameter Point ID is invalid The ID of a point (interpolation point) of a motion function is less than 1. 4B34 19252 Parameter Number of points is invalid The number of points (interpolation points) of a cam plate to be read or written is less than 1. 4B35 19253 Parameter MC table type is invalid