beckhoff TwinCAT 2 Motion — 2.10 Kinematic Transformation

Overview of NC Errors 2.10 Kinematic Transformation NC Errorcodes 76 Version: 1.1 Error(Hex) Error(dec) Error type Description The modulo settings on the drive controller and in the NC are different. 4BBA 19386 Function Brake test failed The brake test has failed. 4BBB 19387 Function Not supported drive type The determined drive or axis type is not supported. 4BBC 19388 Function Command was aborted The command was aborted by another command. 4BBD 19389 Function TimeOut The command was aborted due to timeout. Error numbers 0x4BC0 .. 0x4BCF are used in the Tc3 DriveMotionControl-Lib : _ 4BC2 19394 Invalid position offset The new position offset exceeds the valid value range.

4BC3 19395 Invalid I/O data I/O data are invalid or the terminal is in an error state. 4BC4 19396 ADS port not linked in the interface The ADS port variable of the terminal was not linked to the axis interface of the PLC and parameters of the terminal are to be changed. Error(Hex) Error(Dec) Error type Description 4C00 19456 Transformation failed The calculation of the transformation failed 4C01 19457 Ambiguous solution The solution for the transformation is not unique. 4C02 19458 Invalid axis position The transformation cannot be calculated with the current position data. Possible causes:

• The position is outside the working area of the kinematics 4C03 19459 Configuration Invalid dimension The dimension of the parameterized input parameter does not match the dimension expected by the kinematic object. Possible causes: • Too many position values are supplied for this configuration. Check the number of parameterized axes. 4C04 19460 Internal error NCERR KINTRAFO REGISTRATION _ _ 4C05 19461 Internal Newton iteration failed The Newton iteration does not converge. 4C06 19462 Internal Jacobi matrix cannot be inverted The Jacobi matrix cannot be inverted. 4C07 19463 Configuration Invalid cascade This kinematic configuration is not permitted.