Overview of NC Errors NC Errorcodes 82 Version: 1.1 Error(Hex) Error(Dec) ErrorType Description 0x818a 33162 NC Programmin g Path is locked against modifications. The path was locked to further changes. However, it might be resettable. 0x818c 33164 Parameter Position out of modulo range. Position must be larger or equal to zero and less or equal to the modulo factor when using modulo positioning. When using modulo positioning, the target position is interpreted in consideration of the AdditionalTurns variable at the Options input. 0x818d 33165 Parameter The specified value AdditionalTurns at the Options input is not allowed.
The parameter AdditionalTurns must be zero for the specified value of the parameter Direction. 0x818e 33166 Function Block Master/Slave sync position incompatible with sync direction. The given sync positions require the slave moving in a direction which is not allowed while in synchronization phase. 0x8f38 - 0x8f50 36664 - 36688 Internal Internal Error. 0x8f56 36694 Internal Internal Error. 0x8f59 36697 Internal Internal Error. 0x8f5c - 0x8f62 36700 - 36706 Internal Internal Error. 0x8f65 36709 Internal Internal Error. 0x8f68 - 0x8ffe 36712 - 36862 Internal Internal Error.