Blue Smart IP67 Charger 4.4. Commencing a new charge cycle A new charge cycle will commence when: 1. The configured Re-bulk condition is satisfied (typically due to a large load): A. Re-bulk current is disabled (default configuration): The current output must be maintained at the maximum current output for four seconds. B. Re-bulk current is configured with a user defined value: The current output must exceed the configured Re-bulk current for four seconds while the charger is in float or storage stage. 2. VictronConnect is used to select a new charge mode or change the function from Power Supply to Charger mode. 3.
The power supply to the AC power supply has been disconnected and reconnected. Page 10 Operation