Blue Smart IP67 Charger Charge cycle statistics A. Cycle overview Expandable bar chart showing the time spent in each charge stage and the charge capacity provided (in Ah) during each charge stage B. Status Confirms if the charge cycle was successfully completed or if it was ended early/interrupted, including the reason/cause C. Elapsed The elapsed time of the recharge stages (Bulk and Absorption) D. Charge Total capacity provided during the recharge stages (Bulk and Absorption) E. Maintain F. Type Total capacity provided during the charge maintenance stages (Float, Storage and Recondition) The charge cycle mode used; either a Built-in preset mode or a custom User defined configuration G.
Vstart Battery voltage when charging commences H. Vend Battery voltage when charging is complete (end of absorption stage) I. Error Displays if any errors occurred during the charge cycle, including the error number and description Charger lifetime statistics A. Operation time B. Charged Ah The total operation time over the lifetime of the charger The total charge capacity (in Ah) provided over the lifetime of the charger C. Cycles started The total charge cycles started over the lifetime of the charger D. Cycles completed E. Cycles completed % The total charge cycles completed over the lifetime of the charger The percentage of charge cycles completed over the lifetime of the charger F.
Number of power-ups G. Number of deep discharges The number of times the charger has been powered up over the lifetime of the charger The number of times the charger has recharged a deeply discharged battery over the lifetime of the charger Page 51 Monitoring