IP67 Charger — 9. Technical specifications

Blue Smart IP67 Charger Page 65 Technical specifications Electrical 24/5 24/8 24/12 Mains power voltage (Nominal | Min/Max) 220 - 240VAC | 180 - 265VAC Mains power frequency (Nominal | Min/Max) 50 - 60Hz | 45 - 65Hz Power factor >0.6 Standby power 0.5W Max efficiency 95% 96% Normal 28.8V | 27.6V | 26.4V Charge voltage (Absorption | Float | Storage) High 29.4V | 27.6V | 26.4V Li-ion 28.4V | N/A | 27.0V Temperature compensation (N/A for Li-ion) -32mV/°C (-18mV/°F) Charge algorithm 6-stage adaptive (3 stage for Li-ion) Charge current limit Max 5A 8A 12A (in selected mode) Low 2A 3A 4A Max battery capacity (≥0.1C in max mode) 50Ah 80Ah 120Ah Min battery capacity - Lead-acid Max 17Ah 27Ah 40Ah (≤0.3C in selected mode) Low 7Ah 10Ah 13Ah Min battery capacity - Li-ion Max 10Ah 16Ah 24Ah (≤0.5C in selected mode) Low 4Ah 6Ah 8Ah Start interrupt output (24/12(1+Si) model only) 0,5A max | Up to 1V below the charger output voltage Fault protection Reverse polarity (fuse), output short circuit and over temperature Communication Bluetooth (via VictronConnect app) Bluetooth power and frequency +4dBm | 2402 - 2480MHz Cooling Convection (no fan) Operating temperature range -20 to 60°C (-4 to 140°F) with full rated output up to 40°C (104°F) Max humidity 100% Physical Material and colour Aluminium | Blue RAL 5012 Mains power connection 1.5m (5ft) mains cable with CEE 7/7, BS 1363 or AS/NZS 3112 plug Battery connection Type 1.5m (5ft) figure-8 red/black cable with M8 ring terminals Cable 12 AWG 9 AWG Output fuse rating Internal No 25A 30A (Internal fuse is not serviceable) Cable 20A 20A 25A Ingress protection (IP) rating IP67 Weight 1.8kg (4.0lb) 2.4kg (5.3lb) Dimensions (h x w x d) 85 x 211 x 60 mm (3.3 x 8.3 x 2.4 inch) 99 x 219 x 65 mm (3.9 x 8.6 x 2.6 inch) Compliance Safety EN 60335-1, EN 60335-2-29 EMC ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4, ETSI EN 300 328 V2.2.2 Automotive ECE R10