0016617 Replacing fuel filter • Installation is the reverse of the removal proce- dure: pay particular attention to the following. e Attention: Note the installed positions of fuel feed line (3) and fuel return line (2). d Warning: Comply with safety precautions when handling or working with fuel; note that the fuel lines are pressu- rised. (Inspection III, every 40,000 km/24,000 miles) • Close hose clamps with pliers, BMW No. 13 1 500 . – Place the motorcycle on the auxiliary stand, BMW No. 00 1 620 . – Remove left cover ( a 46.6). X Tightening torque: Stowage-compartment rail to stowage-compart- ment frame.....................................................
9 Nm Cover, rear, to right and left covers and stowage-compartment frame ......................... 2 Nm Right and left covers to air duct ..................... 3 Nm Right and left covers to main frame................ 2 Nm Cover, front, to right and left covers ............... 1 Nm Right and left turn indicators to fairing bracket3 Nm Fuel filter to stowage-compartment frame ...... 9 Nm 1 2 5 4 3 13 3 010 K14000360 • Remove the fastener securing the fuel filter to the stowage-compartment frame (4). • Close off fuel supply line (3) and the line to the fuel injector (5) with hose clips, BMW No. 13 3 010 . • Slacken the hose clamps. d Warning:
Fuel escapes from the filter when the lines are dis- connected. • Disconnect fuel lines (2, 3, 5) from the filter. • Remove clamp (1) from the fuel filter. 00.44