CAUTION CAUTION ● Be sure to always press and hold the brake pedal when shifting gears. Release the pedal only after the intended gear is displayed on the instrument cluster. ● For safety considerations, refrain from using the EPB for braking in normal driving. If the brake pedal fails or is blocked, use the emergency braking function while you can always keep the vehicle under control and drive normally. ● Within several seconds after the vehicle is started, the EPB system performs a power-on self-test (POST). In this process, the EPB system does not respond to any operations.
● As the EPB cannot go beyond the physical limit of road adhesion, activating the emergency brake function may result in vehicle drift, sideslip, or deflection when the vehicle passes through bends or dangerous/heavy-traffic road sections, or when the vehicle is driven under severe weather conditions. Be careful to avoid any accident. Releasing by pressing the accelerator pedal ● When the vehicle has been started and in Drive or Reverse, engage EPB by enabling Electronic Parking Brake on the infotainment system, then press the accelerator pedal slowly to a certain degree. EPB is released automatically and EPB Trailer Mode turns off with the message "EPB released" displayed.
The EPB trailer mode is mainly set for the automatical EPB engagement function with the ignition off. When the vehicle needs to be powered off for being towed, or when it malfunctions, you can switch on the mode to exit parking with EPB. If the malfunction cannot be relieved, contact a BYD authorized dealer or service provider immediately. EPB Release Failure ● If EPB release fails, enable the EPB trailer mode in the infotainment touchscreen → → Service → Overhaul . ● If EPB can be released, drive the vehicle to the nearest BYD authorized dealer or service provider for inspection as soon as possible. ● Tap → Service → Overhaul → EPB Trailer Mode to enable the function.
● If it cannot be released, contact a BYD authorized dealer or service provider. ● EPB trailer mode activation conditions (all must be met): ● The vehicle is in Park. Emergency Braking When Brake Pedal Fails ● Press the brake pedal. ● The charging connector is not connected, and the vehicle is not being charged. ● If braking fails or is blocked, continue to press the "P" button for over two seconds for emergency braking. 110