CAUTION EPB Operating Sound ● When the activating conditions of EPB trailer mode are not met, a corresponding prompt message displays on the infotainment touchscreen. ● EPB motor noises can be heard while the EPB is being engaged or released. ● If there is a burning smell or unusual noise after emergency braking is activated, contact a BYD authorized dealer or service provider immediately. ● After activating the EPB trailer mode, the corresponding screen always displays on the infotainment touchscreen unless you tap to exit the EPB trailer mode. WARNING ● To prevent skidding, shift to "P" and make sure the EPB is on before leaving the vehicle.
● When the vehicle is on a slope and you need to enable the EPB trailer mode, do not release the brake pedal during the process to avoid vehicle slipping. ● To prevent a serious accident, never allow any passenger in the vehicle to operate the EPB switch when the vehicle is running. 04 USING AND DRIVING ● EPB trailer mode exiting conditions (one of them is enough): ● When the EPB switch is pulled or released, the brake pedal must be pressed to prevent the vehicle from moving, and the subsequent locking of the gearshift that occurs because EPB cannot provide a sufficient parking force. ● Disable the EPB trailer mode on the infotainment touchscreen. ● Press the "P" button.
● Charging starts after the charging connector is connected. EPB System Indicator Automatic Vehicle Hold (AVH) ● When the vehicle is powered on, if the EPB is engaged, is solid on on the instrument cluster. Automatic Vehicle Hold (AVH) The automatic vehicle hold (AVH) is activated automatically when the moving vehicle needs to be stationary for longer periods of time, such as in traffic jams on a slope or waiting at traffic lights. ● When the vehicle is powered off, if the EPB is engaged, on the instrument cluster turns on and then turns off in several seconds. AVH standby ● When the vehicle is powered on, the EPB system starts self-check.
turns on and then off in several seconds on the instrument cluster. If it does not, the EPB or braking system may be faulty. It is recommended to contact a BYD authorized dealer or service provider for inspection immediately. ● When the ignition is on, press the AVH switch to enable AVH. is displayed on the instrument cluster. ● Press the AVH switch again to disable AVH. 111