C2SEA/C2SEE User's Manual 2-7 Jumper Settings Explanation of Jumpers 3 2 1 Connector Pins To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identified with a square solder pad on the printed circuit board. See the motherboard layout pages for jumper locations. Jumper Cap 3 2 1 Setting Pin 1-2 short Note : On two pin jumpers, "Closed" means the jumper is on and "Open" means the jumper is off the pins. GLAN Enable/Disable JPL1 enables or disables GLAN1 Port on the motherboard. See the table on the right for jumper settings.
The default set- ting is enabled. KB/Mouse CPU Fan A.
GLAN Port 1 Enable JPW2 Fan1 VGA HDMI CPU SPDIF_Out DIMM1A DIMM1B DIMM2A DIMM2B DIMM4 JPW1 LAN1 USB2/3/4/5 USB/0/1 JPUSB1 Fan5 Intel HD AUDIO G45 (C2SEA) G43 (C2SEE) DIMM1 DIMM2 DIMM3 JPL1 Slot7 PCI-E x1 A C2SEA/C2SEE Fan3 Fan2 Intel Lan CTRL Slot5 PCI 33MHZ Slot6 PCI-E Gen2 x16 SPI BIOS CMOS CLEAR LE1 JLED FP Audio Slot4 PCI-E x4 on x16 ICH10 JWD I-SATA0 JF1 JOH JI2C1 CD1 SPKR1 JI2C2 Slot3 PCI 33MHz Slot2 PCI 33MHz Battery JPAC JPD1 JD1 USB 10/11 I-SATA4 I-SATA5 I-SATA2 I-SATA1 S I/O Slot1 PCI 33MHz JWOL JPI1 CTRL IDE USB 8/9 USB6 JPUSB2 I-SATA3 USB7 Printer COM1 JWOR Floopy 1394_1 1394_2 JL1 IDE Fan4 2-24 GLAN Enable JPL1 Pin# Definition 1-2 Enabled (default) 2-3 Disabled