Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

C2SEA/C2SEE User's Manual Jumpers JI 2 C1/JI 2 C2 allow you to connect PCI/PCI-Exp. Slots to the System Manage- ment Bus. The default setting is open to disable the connection. See the table on the right for jumper settings. PCI/PCI-E Slots to SMB Speeds Clear CMOS JBT1 is used to clear CMOS. Instead of pins, this "jumper" consists of contact pads to prevent the accidental clearing of CMOS. To clear CMOS, use a metal object such as a small screwdriver to touch both pads at the same time to short the connection. Always remove the AC power cord from the system before clearing CMOS. Note :

For an ATX power supply, you must completely shut down the system, remove the AC power cord and then close pins 1 and 2 to clear CMOS. KB/Mouse CPU Fan A. JI 2 C1 JPW2 Fan1 B. JI 2 C2 VGA HDMI CPU C.

JBT1 SPDIF_Out DIMM1A DIMM1B DIMM2A DIMM2B DIMM4 JPW1 LAN1 USB2/3/4/5 USB/0/1 JPUSB1 Fan5 Intel HD AUDIO G45 (C2SEA) G43 (C2SEE) DIMM1 DIMM2 DIMM3 JPL1 Slot7 PCI-E x1 C2SEA/C2SEE Fan3 Fan2 Intel Lan CTRL Slot5 PCI 33MHZ Slot6 PCI-E Gen2 x16 SPI BIOS CMOS CLEAR C LE1 JLED FP Audio A B Slot4 PCI-E x4 on x16 ICH10 JWD I-SATA0 JF1 JOH JI2C1 CD1 SPKR1 JI2C2 Slot3 PCI 33MHz Slot2 PCI 33MHz Battery JPAC JPD1 JD1 USB 10/11 I-SATA4 I-SATA5 I-SATA2 I-SATA1 S I/O Slot1 PCI 33MHz JWOL JPI1 CTRL IDE USB 8/9 USB6 JPUSB2 I-SATA3 USB7 Printer COM1 JWOR Floopy 1394_1 1394_2 JL1 IDE Fan4 2-26 SMBus to PCI-X/PCI-Exp Slots Jumper Settings Jumper Setting Definition Closed Enabled Open Disabled (Default)