Super Micro Computer, Inc. C2SEA/C2SEE — Super Micro C2SEA/C2SEE User's Manual PDF Download

Chapter 4: AMI BIOS ACPI Configuration Use this feature to configure ACPI (Advanced Configuration and Power Interface) power management settings for your system. ACPI Aware OS Select Yes to enable ACPI support for the OS. Disable this feature if ACPI is not supported by your OS. The options are Yes and No. Suspend Mode This setting allows you to configure the ACPI (Advanced Configuration and Power Interface) state for your system when it is in the Supsend mode. The options are S1 (POS) , S3 (STR) and Auto. ACPI Version Feature This feature allows the user to select ACPI Version for the system. The options are ACPI v1.0, ACPI v2.0 , and ACPI v3.0.

Watch Dog Function Select Enable to enable Watch Dog Timer and allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled . USB Device Wake Up Select Enable to "wake-up" the system via a USB device when the system is in S3 (Standby) or S4 (Hibernate) State. The options are Enabled and Disabled . PS2 KB/MS Wake Up Select Enable to "wake-up" the system using either the PS2 keyboard or mouse (if equipped) when the system is in S3 (Sleep) or S4 (Hibernate) state. The options are Enabled and Disabled . Restore on AC Power Loss The feature allows the user to set the power state after a power outage.

Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last state before a power loss. The options are Power-On, Power-Off and Last State. MPS Revision This feature allows the user to specify the version of the Multi-Processor Specifica- tion (MPS) the motherboard is using. The options are 1.4 and 1.1. 4-5