C2SEA/C2SEE User’s Manual Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow the drives that are attached to these host adaptors to func- tion as bootable disks. If this item is set to Disabled , the ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives attached to these adaptors will not function as bootable devices. Interrupt 19 Capture Processor & Clock Options Warning When you first enter the Advanced Setup screen, the Setup Warning will be displayed.
Follow the instructions and set the correct value for each item to ensure that the system functions properly. Ratio CMOS Setting This option allows the user to set the ratio between the CPU Core Clock and the FSB Frequency. ( Note : if an invalid ratio is entered, the AMI BIOS will restore the setting to the previous state.) CPU VID This feature allows the user to set VID for the processor. When this feature is set to Enabled, C1E and TM2 might not function properly. The default setting is Default .
Hardware Prefetcher (Available when supported by the OS and the CPU) If set to Enabled, the hardware prefetcher will prefetch streams of data and instruc- tions from the main memory to the L2 cache in the forward or backward manner to improve CPU performance. The options are Disabled and Enabled . Adjacent Cache Line Prefetch (Available when supported by the OS and the CPU) The CPU fetches the cache line for 64 bytes if this option is set to Disabled. The CPU fetches both cache lines for 128 bytes as comprised if Enabled . Max CPUID Value Limit This feature allows the user to set the maximum CPU ID value.
Enable this function to boot the legacy operating systems that cannot support processors with extended CPUID functions. The options are Enabled and Disabled (for the Windows OS.). 4-6