Chapter 4: BIOS Enable Wireless Charge Support Use this feature to enable or disable wireless charging support. The options are Disabled and Enabled. Enable FFU Support Use this feature to enable or disable FFU (Full Flash Update) support. FFU can capture hard drive information, including partitions. The options are Disabled and Enabled. SATA Configuration When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA devices that are supported by the Intel PCH chip and displays the following items: SATA Controller(s) This item enables or disables the onboard SATA controller supported by the Intel PCH chip. The options are Enabled and Disabled.
SATA Mode Selection Use this item to select the mode for the installed SATA drives. The options are AHCI and RAID. SATA Test Mode Use this item to disable or enable the SATA testing mode. The options are Enabled and Disabled . *If this item is set to Disabled, then Software Feature Mask Configuration and Aggressive LPM Support are available for configuration. Software Feature Mask Configuration RAID0 Use this item to disable or enable RAID0 support. The options are Disabled and Enabled . RAID1 Use this item to disable or enable RAID1 support. The options are Disabled and Enabled . RAID10 Use this item to disable or enable RAID10 support. The options are Disabled and Enabled .
RAID5 Use this item to disable or enable RAID5 support. The options are Disabled and Enabled . Intel Rapid Recovery Technology Use this item to disable or enable Intel Rapid Recovery Technology support. The options are Disabled and Enabled . 73