C7C232-CB-ML User's Manual OROM UI and Banner Select Enabled for RAID information to display during the POST. The options are Disabled and Enabled . HDD Unlock Select Enabled to enable the HDD password unlock. The options are Disabled and Enabled . LED Locate If Enabled, this feature provides an indication that the LED/SGPIO hardware is attached. The options are Disabled and Enabled . IRRT Only on eSATA The IRRT (Intel Rapid Recovery Technology) feature is part the Intel Rapid Stroage Technology. If this feature is enabled, it mirrors data from a primary hard drive to a recovery drive. The options are Disabled and Enabled .
Smart Repsonse Technology Use this item to disable or enable Smart Resonse Technology. The options are Disabled and Enabled. OROM UI Normal Delay Use this item to select the delay time of the OROM UI splash screen. The options are 2 Seconds, 4 Seconds , 6 Seconds, and 8 Seconds. RST Force Form Use this item to enable or disable Intel Rapid Storage Technology. The options are Disabled and Enabled. Aggressive LPM Support When this item is set to Enabled, the SATA AHCI controller manages the power usage of the SATA link. The controller will put the link in a low power mode during extended periods of I/O inactivity, and will return the link to an active state when I/O activity resumes.
The options are Enabled and Disabled . Serial ATA Port 0 ~ Port 5 This item displays the information detected on the installed SATA drive on the particular SATA port. Software Preserve Port 0 ~ Port 5 Use this item to enable or disable the designated SATA port. The options are Disabled and Enabled . 74