Supermicro C7C232-CB-ML — Supermicro C7C232-CB-ML Motherboard User's Manual PDF

Chapter 4: BIOS Graphics Configuration Primary Display Use this feature to select the graphics device to be used as the primary display. The options are Auto , PEG, and PCIE. Primary PEG This feature allows the user to select the primary PCI Express Graphics (PEG) slot. The options are Auto , PEG11, and PEG12. Primary PCIE (PCI-Express Graphics) This feature allows the user to specify which graphics card to be used as the primary graphics card. The options are Auto , PEG1, PEG2, PEG3, PEG4, PEG5, PEG6, PEG7, PEG8, PEG9, PEG10, PEG11, PEG12, PEG13, PEG14, PEG15, PEG16, PEG17, PEG18, and PEG19. DMI/OPI Configuration The following DMI information will display:

DMI DMI Vc1 Control Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and Disabled . DMI Vcm Control Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled and Disabled. Program Static Phase1 Eq Use this feature to configure the De-emphasis control on DMI. The options are Disabled and Enabled . DMI Link ASPM Control Use this feature to set the ASPM (Active State Power Management) state on the SA (System Agent) side of the DMI Link. The options are Disabled and L1 . DMI Extended Sync Control Use this feature to enable or disable the DMI extended synchronization. The options are Enabled and Disabled . 81