C7C232-CB-ML User's Manual DMI De-emphasis Control Use this feature to configure the De-emphasis control on DMI. The options are -6 dB and -3.5 dB . PEG Port Configuration PEG 0:1:0 Enable Root Port Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port specified by the user. The options are Disabled, Enabled, and Auto. Max Link Speed Use this item to configure the link speed of a PCI-E port specified by the user. The options are Auto , Gen1, Gen2, and Gen3. ASPM Use this item to set the Active State Power Management (ASPM) level for a PEG0. Select Auto for the system BIOS to automatically set the ASPM level based on the system configuration.
Select Disabled to disable ASPM support. The options are Disabled , Auto, ASPM L0s, ASPM L1, ASPM L0sL1. PEG0 Slot Power Limit Value Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+" or "-" on the keyboard to change this value. The default setting is 75 . PEG0 Slot Power Limit Scale Use this feature to select the scale used for the slot power limit value. The options are 1.0x , 0.1x, 0.01x, and 0.001x. PEG 0:1:1 Enable Root Port Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port specified by the user. The options are Disabled, Enabled, and Auto.
Max Link Speed Use this item to configure the link speed of a PCI-E port specified by the user. The options are Auto , Gen1, Gen2, and Gen3. PEG1 Slot Power Limit Value Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+" or "-" on the keyboard to change this value. The default setting is 75 . 82