Supermicro C7C232-CB-ML — Supermicro C7C232-CB-ML Motherboard User's Manual PDF

Chapter 4: BIOS PEG1 Slot Power Limit Scale Use this feature to select the scale used for the slot power limit value. The options are 1.0x , 0.1x, 0.01x, and 0.001x. PEG 0:1:2 Enable Root Port Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port specified by the user. The options are Disabled, Enabled, and Auto. Max Link Speed Use this item to configure the link speed of a PCI-E port specified by the user. The options are Auto , Gen1, Gen2, and Gen3. PEG2 Slot Power Limit Value Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+" or "-" on the keyboard to change this value. The default setting is 75 .

PEG2 Slot Power Limit Scale Use this feature to select the scale used for the slot power limit value. The options are 1.0x , 0.1x, 0.01x, and 0.001x. PEG0 Max Payload size Use this feature to select the PEG0 max payload size. The options are Auto , 128TLP, and 256TLP. Detect Non-Compliance Device Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant with the PCI-E standards. The options are Disabled and Enabled. Program PCIe ASPM after OpROM PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power management protocol used to manage power consumption of serial-link devices installed on PCI-Exp slots during a prolonged off-peak time.

If this item is set to Enabled, PCI-E ASPM will be programmed after OPROM. If this item is set to Disabled, the PCI-E ASPM will be programmed before OPROM. The options are Disabled and Enabled. Memory Configuration The following memory information will display: Memory RC Version Memory Frequency 83