C7Z87-OCE User’s Manual 2-8 Jumper Settings Explanation of Jumpers To modify the operation of the mother board, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identified with a square solder pad on the printed circuit board. Note: On two-pin jumpers, "Closed" means the jumper is on, and "Open" means the jumper is off the pins. LAN1/LAN2 Enable/Disable GLAN Enable Jumper Settings Jumpers JPL1/JPL2 enable or disable LAN ports 1/2 on the motherboard. See the table on the right for jumper settings. The default setting is enabled. Pin# Definition 1-2 Enabled (default) 2-3 Disabled A. JPL1:
LAN1 Enable B. JPL2: LAN2 Enable B A 2-32