Flatbed left cover 1 Open the ADF unit. 2 Remove the lower delivery roller cover. See page 109. 3 Remove two screws (callout 1). 1 Figure 81. Flatbed left cover (1 of 2) 4 Insert a small flatblade screwdriver into the slot (callout 2). 5 Slide the screwdriver toward the front of the MFP until the screwdriver is aligned with the lock (callout 3), and pry outward to disengage one tab (not visible). 6 Slide the cover toward the back of the scan engine and remove it. 2 2 3 3 Figure 82. Flatbed left cover (2 of 2) C8523-90921 External covers 115