CIP Safety 3rd Party Tool Instructions 080318

CIP Safety 3rd Party’s Device Additional Tool Function

SYSMAC Studio NX-SL5 3 rd Party Vendor Objects CIP Safety 3rd Party’s Device Additional Tool Instructions Background of this document OMRON is providing this tool to add third party devices to SYSMAC Studio for users with version 1.23 or later (SYSMAC - FE001L license key installed, or July Authored version), when using the Safety Programming function. Overview For users with SYSMAC Studio programming the NX - SL 5_ series CPU when connecting to Ethernet/IP:

 Robot Controllers which have CIP Safety Communication Function  Devices such as CIP Safety slaves Purpose of this Document When using the NX-CSG320 Communication Control Unit or Machine Automation Controller NX102 and Safety CPU Unit NX-SL5_, this software patch adds the necessary file to Sysmac Studio in order to connect with another company's CIP Safety device. This document explains how to use the tool for uploading these files onto a computer, registering the information to Sysmac Studio below is an explanation and operation of that tool.

References Sysmac Studio Operation Manual www.omron247.com > Software > Sysmac Studio > Download (tab) https://industrial.omron.us/en/products/sysmac-studio#downloads Usage Case Using the communication controller unit: NX-CSG 320 Communication Control Unit or Machine Automation Controller NX102 and Safety CPU Unit NX-SL5_ with Sysmac Studio CIP Safety 3rd Party’s Device Additional Tool Function Execute the .exe file to add another company device using files provided by OMRON to Sysmac Studio sub- directories by doing so other company's CIP Safety Device will be added to SYSMAC Studio's safety programming function.

Page 1

Installation procedure

SYSMAC Studio NX-SL5 3 rd Party Vendor Objects Installation procedure Run: “CIPSafetyAdditionalPatch.exe” Run: “CIPSafetyAdditionalPatch.exe” Select either English or Japanese and select “OK” Select “Next” to continue

Page 2

Installation procedure

SYSMAC Studio NX-SL5 3 rd Party Vendor Objects Choose “I accept the terms of the license agreement” and select “Next” to continu e Select “Install” to continue Select “Finish” completing the installation

Page 3