7. Connection Procedure Additional Information If the CX-Programmer and PLC are not connected online, please check the connection of the cable. Or, return to step 2, check the settings and repeat each step. Refer to Connecting Directly to a CJ2 CPU Unit Using a USB Cable in Chapter 3 Communications in PART 3: CX-Server Runtime of the CX-Programmer Operation Manual (Cat. No. W466) for details. Additional Information environmental setting of CX-Programmer. The dialogs explained in the following procedures may not be displayed depending on the For details on the environmental setting, refer to Options and Preferences in Chapter 3 Project Reference in PART 1:
CX-Programmer of the CX-Programmer Operation Manual (Cat. No. W466). This document explains the setting procedure when the Confirm all operations affecting the PLC Check Box is selected. 15 4 The dialog box on the right is displayed. Check the message on the dialog and if there is no problem, click the No Button. 5 The dialog box on the right is displayed, and the CX-Programmer and the PLC is automatically connected. 6 Confirm that the CX-Programmer and the PLC are normally connected online. *The icon is shown during online connection.