Commodore MPS 1000 — Commodore MPS 1000 Dot Matrix Printer User's Manual PDF

ESC DEC HEX Symbol Function 14 OE so Shift out. Turns enlarged mode ON for the length of the line. Same as ESC S9. Can be canceled by ASCII 20 or ESC "WO". Works with pica, elite or condensed mode. 15 OF SI Shift in. Empties buffer and turns condensed (17.16 cpi) ON. Cannot mix with emphasized or pica. 18 12 DC2 Clears condensed mode. 20 14 DC4 Turns the enlarged mode set by ASCII 14 OFF. 24 18 CAN Cancels all text but not control codes in the printer buff er. 27 lB ESC ESCape. Prepares the printer to receive control codes. ESC 45 2D Turns underline mode ON. Format: ESC "-"n where n toggles underline on and off: 0 turns it OFF, 1 turns it ON.

ESC 48 30 0 Sets line spacing to 1I8-inch (9-dot). ESC 49 31 1 Sets line spacing to 7172 inch(7-dot). ESC 50 32 2 Sets line spacing to previous definition (ESC "A"). ESC 51 33 3 Sets line spacing to NI 216 inch ( 11 216-inch is 1/3-dot). Stays on until changed. Format: ESC "3"n ESC 53 35 5 Turns auto line feed mode ON. For- mat: ESC "5" n where n toggles auto LF on and off. 0 turns it OFF, 1 turns it ON. ESC 54 36 6 Select IBM Character/Graphic (CG) Set 2 ESC 55 37 7 Select IBM CG Set 1 ESC 56 38 8 Disables the paper-out sensor. Can also be disabled with DIP switch 1-5. ESC 57 39 9 Enables the paper-out sensor. Can also be enabled with DIP switch 1-5.

ESC 58 3A Select elite mode (draft only). ESC 60 3C Turns one-line unidirectional mode ON. Prints each line from left to right.