Commodore MPS 1000 — Commodore MPS 1000 Dot Matrix Printer User's Manual PDF

ESC DEC HEX Symbol Function ESC 64 40 @ Reset code, which resets the printer to its power- up state including resetting top of page. Clears all text and control codes from the print buffer. ESC 65 41 A Sets line spacing to n/72-inch (n-dot). Format: ESC 'W'n where n = 0-2 5 5. This value effective after sending ESC "2" . ESC 66 42 B Sets up to 16 vertical tabs in the cur- rent line spacing. Tab settings are not affected by subsequent changes in line spacing. Format: ESC "B"n 1 n 2 nk 0 where rue= 1-255. Terminate this tab sequence with 0 or a number less than the last defined tab (rue). ESC 67 43 c Sets the form length to n lines in the current line spacing. The default is 66 lines.

Also resets top of form. Format: ESC "C"n where n= 1-127. ESC 67 43 c Sets the form length to n inches, regardless of the current line spacing. The default length is 11 inches. Also resets top of form. Format: ESC "C"On where n = 1-22. ESC 68 44 D Resets the current tabs and sets up to 32 horizontal tabs in the current pitch. Tabs may range up to the maximum width for the character and printer size. For example, the maximum tab for pica characters on an 8-inch line is 79. Tab settings are not affected by subsequent changes in pitch. Format: ESC "D"n 1, n 2 nk O Terminate this tab sequence with 0 or a number less than the last defined tab (nk). ESC 69 45 E Turns emphasized mode ON.

Can not mix with elite or compressed mode. B-5