Commodore MPS 1000 — Commodore MPS 1000 Dot Matrix Printer User's Manual PDF

ESC DEC HEX Symbol Function ESC ESC 70 71 46 47 F G Turns emphasized mode OFF. Turns double-strike mode ON. Can- not mix with NLQ mode. Turns double-strike mode OFF. Forces an immediate line feed of n I 216 inches without changing the cur- rent line spacing. Prints the contents of the buffer without a carriage For- mat: ESC ESC 72 74 48 4A H J ESC ''J"n where n=0-255. Turns single-density graphics mode ON. Prints 480 dots per 8-inch line. Format: ESC 75 4B K ESC "K" n1 nz followed by n data numbers, where n =total number of dot columns, n1 = nMOD 256, Oz= INT(n/ 256). For example, to print 480 dots n1 =244, Oz= 1. Turns low-speed, double-density graphics mode ON.

Prints 960 dots per 8-inch line. Format: ESC 76 4C L ESC "L" 0 1 Oz followed by n data numbers, where n =total number of dot columns n1 = nMOD256, Uz =INT(N/256) . For example, to pnnt 960 dots n1 =192,n z =3. Sets skip-over-perforation to n lines. Format: ESC 78 4E N ESC "N"n where n = 1-12 7. Turns skip-over-perforation OFF. Initializes tabs (vertical and horizon- tal) to default setting. The vertical tab is equal to a line feed. ESC ESC 79 82 4F 52 0 R B-6