Acct-Status-Type = Start Acct-Authentic = RADIUS Service-Type = Login Acct-Session-Id = “00000008” Login-Service = Telnet Login-IP-Host = “10.68.202.158” Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” Wed Jun 27 04:28:39 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 2 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = “5622329477” Acct-Status-Type = Stop Acct-Authentic = RADIUS Service-Type = Login Acct-Session-Id = “00000008” Login-Service = Telnet Login-IP-Host = “10.68.202.158” Acct-Input-Octets = 10774 Acct-Output-Octets = 112 Acct-Input-Packets = 91 Acct-Output-Packets = 99 Acct-Session-Time = 39 Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” The following example shows the information contained in a TACACS+ connection accounting record for an outbound Telnet connection:
Wed Jun 27 03:47:43 2001 172.16.25.15 username1 tty3 5622329430/4327528 start task_id=10 service=connection protocol=telnet addr=10.68.202.158 cmd=telnet username1-sun Wed Jun 27 03:48:38 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=10 service=connection protocol=telnet addr=10.68.202.158 cmd=telnet username1-sun bytes_in=4467 bytes_out=96 paks_in=61 paks_out=72 elapsed_time=55 The following example shows the information contained in a RADIUS connection accounting record for an outbound rlogin connection:
Wed Jun 27 04:29:48 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 2 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = “5622329477” Acct-Status-Type = Start Acct-Authentic = RADIUS Service-Type = Login Acct-Session-Id = “0000000A” Login-Service = Rlogin Login-IP-Host = “10.68.202.158” Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” Wed Jun 27 04:30:09 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 2 User-Name = “username1” Configuring Accounting Connection Accounting Configuring Accounting 10