Acct-Session-Id = “00000010” Acct-Session-Time = 14 Acct-Delay-Time = 0 User-Id = “username1” NAS-Identifier = “172.16.25.15” The following example shows the information contained in a TACACS+ EXEC accounting record for a Telnet user: Wed Jun 27 04:06:53 2001 172.16.25.15 username1 tty26 10.68.202.158 starttask_id=41 service=shell Wed Jun 27 04:07:02 2001 172.16.25.15 username1 tty26 10.68.202.158 stoptask_id=41 service=shell elapsed_time=9 Command Accounting Command accounting provides information about the EXEC shell commands for a specified privilege level that are being executed on a network access server.
Each command accounting record includes a list of the commands executed for that privilege level, as well as the date and time each command was executed, and the user who executed it. The following example shows the information contained in a TACACS+ command accounting record for privilege level 1:
Wed Jun 27 03:46:47 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=3 service=shell priv-lvl=1 cmd=show version Wed Jun 27 03:46:58 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=4 service=shell priv-lvl=1 cmd=show interfaces Ethernet 0 Wed Jun 27 03:47:03 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=5 service=shell priv-lvl=1 cmd=show ip route The following example shows the information contained in a TACACS+ command accounting record for privilege level 15:
Wed Jun 27 03:47:17 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=6 service=shell priv-lvl=15 cmd=configure terminal Wed Jun 27 03:47:21 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=7 service=shell priv-lvl=15 cmd=interface Serial 0 Wed Jun 27 03:47:29 2001 172.16.25.15 username1 tty3 5622329430/4327528 stop task_id=8 service=shell priv-lvl=15 cmd=ip address 10.1.1.1 255.255.255.0 The Cisco implementation of RADIUS does not support command accounting. Note Connection Accounting Connection accounting provides information about all outbound connections made from the network access server such as Telnet, LAT, TN3270, PAD, and rlogin.
The following example shows the information contained in a RADIUS connection accounting record for an outbound Telnet connection: Wed Jun 27 04:28:00 2001 NAS-IP-Address = “172.16.25.15” NAS-Port = 2 User-Name = “username1” Client-Port-DNIS = “4327528” Caller-ID = “5622329477” Configuring Accounting Command Accounting Configuring Accounting 9