cisco Catalyst 9300 Series Switches — Hierarchical QoS Policy Formats

How to Configure Hierarchical QoS The following section provide configurational information about Hierarchical QoS: Enabling Hierarchical QoS When AVB is enabled on the switch, Hierarchical QoS for AVB also gets enabled. Hierarchical QoS Policy Formats This following example shows hierarchical remarking policy at the ingress interface:

policy-map AVB-Input-Child-Policy class VOIP-DATA-CLASS set dscp EF class MULTIMEDIA-CONF-CLASS set dscp AF41 class BULK-DATA-CLASS set dscp AF11 class TRANSACTIONAL-DATA-CLASS set dscp AF21 class SCAVENGER-DATA-CLASS set dscp CS1 class SIGNALING-CLASS set dscp CS3 class class-default set dscp default policy-map AVB-Input-Policy-Remark-AB class AVB-SR-A-CLASS set cos 0 (set 0 for boundary & SR class A PCP value for core port) class AVB-SR-B-CLASS set cos 0 (set 0 for boundary & SR class B PCP value for core port) class class-default service-policy AVB-Input-Child-Policy policy-map AVB-Input-Policy-Remark-A class AVB-SR-A-CLASS set cos 0 (set 0 for boundary & SR class A PCP value for core port) class class-default service-policy AVB-Input-Child-Policy policy-map AVB-Input-Policy-Remark-B Configuring Audio Video Bridging How to Configure Hierarchical QoS Command or Action Purpose Device(config)# ptp priority1 120 If the value of priority1 is configured as 255, the clock cannot be considered as Grandmaster.

Step 4 ptp priority2 value Example: Device(config)# ptp priority2 120 Sets the value of PTP clock priority2. The range is from 0 to 255. The default value is 128. Step 5 exit Example: Device(config)# exit Returns to global configuration mode. Configuring Audio Video Bridging 11