Procedure What to do next To disable AVB on the switch, use the no form of the command. Configuring Audio Video Bridging You can configure the interfaces along the connectivity path for AVB devices as dot1q trunk ports by using the below commands. Procedure Purpose Command or Action Enables privileged EXEC mode. enable Step 1 Configuring Audio Video Bridging Configuring Audio Video Bridging Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 avb Example: Device(config)# avb Enables AVB on the switch.
Step 4 avb strict Example: Device(config)# avb strict Enables AVB on the switch. This command is used in combination with the avb command to enable AVB. Note This command will be deprecated in the future releases. Step 5 end Example: Device(config)# end Returns to privileged EXEC mode. Configuring Audio Video Bridging 7