character can be any single character in the extended ASCII character set, but once defined as the delimiter, that character cannot be used in the text string making up the banner. Procedure Configuring AAA Packet of Disconnect Packet of disconnect (POD) terminates connections on the network access server (NAS) when particular session attributes are identified. By using session information obtained from AAA, the POD client residing on a UNIX workstation sends disconnect packets to the POD server running on the network access server. The NAS terminates any inbound user session with one or more matching key attributes.
It rejects requests when required fields are missing or when an exact match is not found. To configure POD, perform the following tasks in global configuration mode: Procedure Configuring Authentication Configuring AAA Packet of Disconnect Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 aaa new-model Example: Device(config)# aaa new-model Enables AAA. Step 4 aaa authentication fail-message delimiter string delimiter Example: Device(config)# aaa authentication fail-message *Failed login.
Try again.* Creates a message to be displayed when a user login fails. Step 5 end Example: Device(config)# end Exits global configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password, if prompted. Configuring Authentication 25