l2vpn router-id 1.1.1.3 l2vpn evpn replication-type ingress end Step 2 Configure an L2EVPN instance. l2vpn evpn instance 1 vlan-based encapsulation vxlan Step 3 Configure Loopback interface. interface Loopback1 ipv6 address ABCD:1::2/128 ipv6 ospf 1 area 0 Step 4 Configure NVE interface. interface nve1 source-interface Loopback1 host-reachability protocol bgp vxlan encapsulation ipv6 member vni 20011 ingress-replication member vni 20012 mcast-group FF0E::12 Step 5 Configure the VLAN. vlan configuration 11 member evpn-instance 1 vni 20011 Step 6 Configure the L2VPN EVPN BGP peering. interface Loopback0 description BGP UPDATE SOURCE ipv6 address ABCD:1::1/128 ipv6 ospf 1 area 0 !
router bgp 100 bgp router-id 1.1.1.1 bgp log-neighbor-changes bgp graceful-restart neighbor ABCD:99::99 remote-as 100 neighbor ABCD:99::99 update-source Loopback0 ! address-family l2vpn evpn neighbor ABCD:99::99 activate neighbor ABCD:99::99 send-community both exit-address-family ! Configure VXLANv6 for BGP EVPN Fabric with Distributed Anycast Gateway Implement the following tasks to configure IPv6 underlay for a BGP EVPN VXLAN fabric with a Distributed Anycast Gateway (DAG). Configuring BGP EVPN VXLANv6 Configure VXLANv6 for BGP EVPN Fabric with Distributed Anycast Gateway Configuring BGP EVPN VXLANv6 4