Procedure Step 1 Configure IP-VRF. vrf definition red rd 100:1 ! address-family ipv4 route-target export 100:100 route-target import 100:100 route-target export 100:100 stitching route-target import 100:100 stitching exit-address-family ! address-family ipv6 route-target export 100:200 route-target import 100:200 route-target export 100:200 stitching route-target import 100:200 stitching exit-address-family end Step 2 Configure Access SVI IRB interface. interface Vlan11 mac-address 0011.0011.0011 vrf forwarding red ip address 192.168.11.254 255.255.255.0 ipv6 address 2001:11::254/64 end Step 3 Configure IPv6 BGP peering.
router bgp 100 bgp router-id 1.1.1.1 bgp log-neighbor-changes bgp graceful-restart neighbor ABCD:99::99 remote-as 100 neighbor ABCD:99::99 update-source Loopback0 ! address-family l2vpn evpn neighbor ABCD:99::99 activate neighbor ABCD:99::99 send-community both exit-address-family ! address-family ipv4 vrf red advertise l2vpn evpn redistribute connected exit-address-family address-family ipv6 vrf red advertise l2vpn evpn redistribute connected exit-address-family end Step 4 Configure NVE interface.
interface nve1 source-interface Loopback1 host-reachability protocol bgp vxlan encapsulation ipv6 member vni 30001 vrf red Configuring BGP EVPN VXLANv6 Configure VXLANv6 for BGP EVPN Fabric with Distributed Anycast Gateway Configuring BGP EVPN VXLANv6 5