cisco — Enabling BGP Routing

Configuring BGP Enabling BGP Routing Command or Action Purpose Device(config-router)# neighbor 172.16.2.33 remove-private-as Step 8 synchronization Example: Device(config-router)# synchronization (Optional) Enables synchronization between BGP and an IGP. Step 9 auto-summary Example: Device(config-router)# auto-summary (Optional) Enables automatic network summarization. When a subnet is redistributed from an IGP into BGP, only the network route is inserted into the BGP table. Step 10 bgp graceful-restart Example: Device(config-router)# bgp graceful-start (Optional) Enables NSF awareness on switch. By default, NSF awareness is disabled. Step 11 end Example:

Device(config-router)# end Returns to privileged EXEC mode. Step 12 show ip bgp network network-number Example: Device# show ip bgp network 10.108.0.0 Verifies the configuration. Step 13 show ip bgp neighbor Example: Device# show ip bgp neighbor Verifies that NSF awareness (Graceful Restart) is enabled on the neighbor. If NSF awareness is enabled on the switch and the neighbor, this message appears: Graceful Restart Capability: advertised and received If NSF awareness is enabled on the switch, but not on the neighbor, this message appears: Graceful Restart Capability: advertised. Step 14 copy running-config startup-config Example:

Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Configuring BGP 17