Managing Routing Policy Changes To learn if a BGP peer supports the route refresh capability and to reset the BGP session: Procedure Configuring BGP Managing Routing Policy Changes Command or Action Purpose Step 1 show ip bgp neighbors Example: Device# show ip bgp neighbors Displays whether a neighbor supports the route refresh capability. When supported, this message appears for the router: Received route refresh capability from peer. Step 2 clear ip bgp {* | address | peer-group-name} Example: Device# clear ip bgp * Resets the routing table on the specified connection. • Enter an asterisk (*) to specify that all connections be reset.
• Enter an IP address to specify the connection to be reset. • Enter a peer group name to reset the peer group. Step 3 clear ip bgp {* | address | peer-group-name} soft out Example: Device# clear ip bgp * soft out (Optional) Performs an outbound soft reset to reset the inbound routing table on the specified connection. Use this command if route refresh is supported. • Enter an asterisk (*) to specify that all connections be reset. • Enter an IP address to specify the connection to be reset. • Enter a peer group name to reset the peer group. Step 4 show ip bgp Example: Device# show ip bgp Verifies the reset by checking information about the routing table and about BGP neighbors.
Step 5 show ip bgp neighbors Example: Device# show ip bgp neighbors Verifies the reset by checking information about the routing table and about BGP neighbors. Configuring BGP 18