cisco — Configuring BGP Route Reflectors

Configuring BGP Route Reflectors To configure BGP route reflectors, perform this procedure: Procedure Configuring BGP Configuring BGP Route Reflectors Command or Action Purpose Step 8 show ip bgp network Example: Device# show ip bgp network Verifies the configuration. Step 9 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 router bgp autonomous-system Example:

Device(config)# router bgp 101 Enters BGP router configuration mode. Step 4 neighbor {ip-address | peer-group-name} route-reflector-client Example: Device(config-router)# neighbor 172.16.70.24 route-reflector-client Configures the local router as a BGP route reflector and the specified neighbor as a client. Step 5 bgp cluster-id cluster-id Example: (Optional) Configures the cluster ID if the cluster has more than one route reflector. Configuring BGP 34