Configuring Route Dampening To configure route dampening, perform this procedure: Procedure Configuring BGP Configuring Route Dampening Command or Action Purpose Device(config-router)# bgp cluster-id 10.0.1.2 Step 6 no bgp client-to-client reflection Example: Device(config-router)# no bgp client-to-client reflection (Optional) Disables client-to-client route reflection. By default, the routes from a route reflector client are reflected to other clients. However, if the clients are fully meshed, the route reflector does not need to reflect routes to clients. Step 7 end Example: Device(config)# end Returns to privileged EXEC mode. Step 8 show ip bgp Example:
Device# show ip bgp Verifies the configuration. Displays the originator ID and the cluster-list attributes. Step 9 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Configuring BGP 35