cisco — Configuring Route Dampening

Configuring BGP Configuring Route Dampening Command or Action Purpose Step 3 router bgp autonomous-system Example: Device(config)# router bgp 100 Enters BGP router configuration mode. Step 4 bgp dampening Example: Device(config-router)# bgp dampening Enables BGP route dampening. Step 5 bgp dampening half-life reuse suppress max-suppress [route-map map] Example: Device(config-router)# bgp dampening 30 1500 10000 120 (Optional) Changes the default values of route dampening factors. Step 6 end Example: Device(config)# end Returns to privileged EXEC mode. Step 7 show ip bgp flap-statistics [{regexp regexp} | {filter-list list} | {address mask [longer-prefix]}] Example:

Device# show ip bgp flap-statistics (Optional) Monitors the flaps of all paths that are flapping. The statistics are deleted when the route is not suppressed and is stable. Step 8 show ip bgp dampened-paths Example: Device# show pi bgp dampened-paths (Optional) Displays the dampened routes, including the time remaining before they are suppressed. Step 9 clear ip bgp flap-statistics [{regexp regexp} | {filter-list list} | {address mask [longer-prefix]} Example: Device# clear ip bgp flap-statistics (Optional) Clears BGP flap statistics to make it less likely that a route will be dampened. Step 10 clear ip bgp dampening Example:

Device# clear ip bgp dampening (Optional) Clears route dampening information, and unsuppress the suppressed routes. Configuring BGP 36