cisco — Configuring BFD Echo Mode

Configuring BFD Echo Mode BFD echo mode is enabled by default, but you can disable it such that it can run independently in each direction. Configuring Bidirectional Forwarding Detection Configuring BFD Echo Mode Command or Action Purpose Step 6 exit Example: Device(config-if)#exit Exits interface configuration mode and returns to global configuration mode. Step 7 ip route static bfd interface-type interface-number ip-address [group group-name [passive]] Example: Device(config)#ip route static bfd TenGigabitEthernet1/0/1 10.10.10.2 Specifies a static route BFD neighbor.

• The interface-type, interface-number, and ip-address arguments are required because BFD support exists only for directly connected neighbors. Step 8 ip route [vrf vrf-name] prefix mask {ip-address | interface-type interface-number [ip-address]} [dhcp] [distance] [name next-hop-name] [permanent | track number] [tag tag] Example: Device(config)#ip route 10.0.0.0 255.0.0.0 TenGigabitEthernet1/0/1 10.10.10.2 Specifies a static route BFD neighbor. Step 9 exit Example: Device(config)#exit Exits global configuration mode and returns to privileged EXEC mode. Step 10 show ip static route Example: Device#show ip static route (Optional) Displays static route database information.

Step 11 show ip static route bfd Example: Device#show ip static route bfd (Optional) Displays information about the static BFD configuration from the configured BFD groups and nongroup entries. Step 12 exit Example: Device#exit Exits privileged EXEC mode and returns to user EXEC mode. Configuring Bidirectional Forwarding Detection 19