Configuring EVPN VXLAN Layer 2 Overlay Network Information About EVPN VXLAN Layer 2 Overlay Network, on page 1 How to Configure EVPN VXLAN Layer 2 Overlay Network, on page 4 Verifying EVPN VXLAN Layer 2 Overlay Network, on page 13 Configuration Examples for EVPN VXLAN Layer 2 Overlay Network, on page 15 Information About EVPN VXLAN Layer 2 Overlay Network An EVPN VXLAN Layer 2 overlay network allows host devices in the same subnet to send bridged or Layer 2 traffic to each other. The network forwards the bridged traffic using a Layer 2 virtual network instance (VNI).
Broadcast, Unknown Unicast, and Multicast Traffic Multidestination Layer 2 traffic in a VXLAN network is typically referred to as broadcast, unknown unicast, and multicast (BUM) traffic. In a BGP EVPN VXLAN fabric, the underlay network forwards the BUM traffic to all the endpoints connected to a common Layer 2 broadcast domain in the VXLAN overlay. The following image shows the flow of BUM traffic through a Layer 2 VNI. The network forwards BUM traffic from host device 1 to all the VTEPs which in turn send the traffic to all the host devices in the same subnet. Configuring EVPN VXLAN Layer 2 Overlay Network 1