cisco — Ingress Replication

Figure 1: BUM Traffic through Layer 2 VNI The MP-BGP EVPN control plane uses two different methods to forward BUM traffic in a VXLAN network: • Underlay Multicast • Ingress Replication Underlay Multicast SSM is not supported for BUM Underlay Multicast. Restriction In underlay multicast, the underlay network replicates the traffic through a multicast group. Forwarding BUM traffic using underlay multicast requires the configuration of IP multicast in the underlay network. A single copy of the BUM traffic moves from the ingress or source VTEP towards the underlay transport network.

The network forwards this copy along the multicast tree so that it reaches all egress or destination VTEPs participating in the given multicast group. Various branch points in the network replicate the copy as it travels along the multicast tree. The branch points replicate the copy only if the receivers are part of the multicast group associated with the VNI. BUM traffic forwarding through underlay multicast is achieved by mapping a Layer 2 VNI to the multicast group. This mapping must be configured on all the VTEPs associated with the Layer 2 VNI. When a VTEP joins the multicast group, it receives all the traffic that is forwarded on that group.

If the VTEP receives traffic in a VNI that is not associated with it, it simply drops the traffic. This approach maintains a single link within the network, thus providing an efficient way to forward BUM traffic. Ingress Replication Ingress replication, or headend replication, is a unicast approach to handle multidestination Layer 2 overlay BUM traffic. Ingress replication involves an ingress device replicating every incoming BUM packet and Configuring EVPN VXLAN Layer 2 Overlay Network Underlay Multicast Configuring EVPN VXLAN Layer 2 Overlay Network 2