Outputs to Verify the Configuration on Spine Switch 2 (RP inside the Network) The following example shows the output for the show ip route command on Spine Switch 2: Spine-02# show ip route Codes:
L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route H - NHRP, G - NHRP registered, g - NHRP registration summary o - ODR, P - periodic downloaded static route, l - LISP a - application route + - replicated route, % - next hop override, p - overrides from PfR Gateway of last resort is not set 172.16.0.0/16 is variably subnetted, 15 subnets, 2 masks O 172.16.13.0/24 [110/2] via 172.16.23.3, 01:45:34, GigabitEthernet1/0/2 O 172.16.14.0/24 [110/2] via 172.16.24.4, 01:45:38, GigabitEthernet1/0/3 C 172.16.23.0/24 is directly connected, GigabitEthernet1/0/2 L 172.16.23.2/32 is directly connected, GigabitEthernet1/0/2 C 172.16.24.0/24 is directly connected, GigabitEthernet1/0/3 L 172.16.24.2/32 is directly connected, GigabitEthernet1/0/3 O 172.16.254.1/32 [110/3] via 172.16.24.4, 00:11:33, GigabitEthernet1/0/3 [110/3] via 172.16.23.3, 00:11:33, GigabitEthernet1/0/2 C 172.16.254.2/32 is directly connected, Loopback1 O 172.16.254.3/32 [110/2] via 172.16.23.3, 01:45:34, GigabitEthernet1/0/2 O 172.16.254.4/32 [110/2] via 172.16.24.4, 01:45:38, GigabitEthernet1/0/3 O 172.16.255.1/32 [110/3] via 172.16.24.4, 01:45:34, GigabitEthernet1/0/3 [110/3] via 172.16.23.3, 01:45:30, GigabitEthernet1/0/2 C 172.16.255.2/32 is directly connected, Loopback0 O 172.16.255.3/32 [110/2] via 172.16.23.3, 01:45:34, GigabitEthernet1/0/2 O 172.16.255.4/32 [110/2] via 172.16.24.4, 01:45:38, GigabitEthernet1/0/3 C 172.16.255.255/32 is directly connected, Loopback2 Spine-02# The following example shows the output for the show bgp l2vpn evpn summary command on Spine Switch 2:
Spine-02# show bgp l2vpn evpn summary BGP router identifier 172.16.255.2, local AS number 65001 BGP table version is 35, main routing table version 35 4 network entries using 1376 bytes of memory 8 path entries using 1664 bytes of memory 1/1 BGP path/bestpath attribute entries using 288 bytes of memory 2 BGP rrinfo entries using 80 bytes of memory 1 BGP extended community entries using 40 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 3448 total bytes of memory BGP activity 10/6 prefixes, 28/20 paths, scan interval 60 secs Configuring EVPN VXLAN Layer 2 Overlay Network Example:
Configuring Layer 2 VNI with Spine Multicast Replication Configuring EVPN VXLAN Layer 2 Overlay Network 44