Configuring Flexible NetFlow Creating a Flow Exporter Command or Action Purpose • Auto Template—Auto-Template interface • Capwap—CAPWAP tunnel interface • GigabitEthernet—Gigabit Ethernet IEEE 802 • GroupVI—Group virtual interface • Internal Interface—Internal interface • Loopback—Loopback interface • Null—Null interface • Port-channel—Ethernet Channel of interface • TenGigabitEthernet—10-Gigabit Ethernet • Tunnel—Tunnel interface • Vlan—Catalyst VLANs Step 8 transport udp number Example: Device(config-flow-exporter)# transport udp 200 (Optional) Specifies the UDP port to use to reach the NetFlow collector. Step 9 ttl seconds Example:
Device(config-flow-exporter)# ttl 210 (Optional) Configures the time-to-live (TTL) value for datagrams sent by the exporter. The range is from 1 to 255 seconds. The default is 255. Step 10 export-protocol {netflow-v9} Example: Device(config-flow-exporter)# export-protocol netflow-v9 Specifies the version of the NetFlow export protocol used by the exporter. Step 11 end Example: Device(config-flow-record)# end Returns to privileged EXEC mode. Step 12 show flow exporter [name record-name] Example: (Optional) Displays information about NetFlow flow exporters. Configuring Flexible NetFlow 24