What to do next Define a flow monitor based on the flow record and flow exporter. Creating a Customized Flow Monitor Perform this required task to create a customized flow monitor. Each flow monitor has a separate cache assigned to it. Each flow monitor requires a record to define the contents and layout of its cache entries. These record formats can be one of the predefined formats or a user-defined format. An advanced user can create a customized format using the flow record command. Before you begin If you want to use a customized record instead of using one of the Flexible NetFlow predefined records, you must create the customized record before you can perform this task.
If you want to add a flow exporter to the flow monitor for data export, you must create the exporter before you can complete this task. You must use the no ip flow monitor command to remove a flow monitor from all of the interfaces to which you have applied it before you can modify the parameters for the record command on the flow monitor. Note Procedure Configuring Flexible NetFlow Creating a Customized Flow Monitor Command or Action Purpose Device# show flow exporter ExportTest Step 13 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file. Command or Action Purpose Step 1 enable Example:
Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Configuring Flexible NetFlow 25